AFFIDABILITA” & TECNOLOGIE 2015

Egregio/a

Grazie per l’interesse dimostrato sui nostri servizi e prodotti in occasione della visita al nostro stand presso l’edizione 2015 di Affidabilità & Tecnologie a Torino.

Saremmo felici di poterla annoverare quanto prima tra i nostri clienti, le ricordiamo che per qualunque ulteriore informazione mi potra’ sempre contattare via mail a mauro.villa@eurocircuits.com oppure ai numeri di telefono +39 02 4945 5804 e +39 346 07 20 435.

Se desidera essere ricontattato per una visita presso la vostra sede o per una demo dei nostri prodotti, la prego di rispondere a questa email, sara’ mia cura chiamarvi per concordare data e modalita”.

Cordialmente,

Mauro Villa / Eurocircuits NV

mauro.villa@eurocircuits.com

Registraties en reservering beursgadget e-brace op volle toeren!

Inhoud

  • e-brace al voor de helft van de aantallen toegewezen
  • e-brace de start van de Eurocircuits service SEMI-FLEX pool

e-brace al voor de helft van de aantallen toegewezen.

De registraties voor een gratis toegangsbewijs en voor een reservering voor het beursgadget lopen op volle toeren. Als Eurocircuits relatie kan u via deze link registreren en verzekert u zich van uw gratis toegangsbewijs en het gadget, e-brace..

e-brace de start van de Eurocircuits service SEMI-FLEX pool!

De e-brace is de eerste print die Eurocircuits in haar service SEMI-FLEX pool maakt.

SEMI-FLEX pool biedt de ontwikkelaar interessante mogelijkheden op vlak van complexe montages van verschillende printen. Vele applicaties zijn gebaat bij een buigbare print die slecht een enkele keer dient te buigen alvorens in gebogen vorm definitief in zijn behuizing te worden gemonteerd. Lees meer in onze BLOG.

Bezoek ons gratis in Utrecht dmv een ticket via deze link en verzeker u van uw eerste SEMI-FLEX print, de e-brace.

Wij hopen velen onder jullie te mogen verwelkomen.

Met vriendelijke groeten,

Matthieu Samain

matthieu.samain@eurocircuits.com

Registraties en reservering beursgadget e-brace op volle toeren! Studenten en docenten wees er snel bij!

Inhoud

  • e-brace al voor de helft van de aantallen toegewezen
  • e-brace de start van de Eurocircuits service SEMI-FLEX pool
  • Tegoedbon van 40€ voor bezoek

e-brace al voor de helft van de aantallen toegewezen.

De registraties voor een gratis toegangsbewijs en voor een reservering voor het beursgadget lopen op volle toeren. Als Eurocircuits relatie kan u via deze link registreren en verzekert u zich van uw gratis toegangsbewijs en het gadget, e-brace..

e-brace de start van de Eurocircuits service SEMI-FLEX pool!

De e-brace is de eerste print die Eurocircuits in haar service SEMI-FLEX pool maakt.

SEMI-FLEX pool biedt de ontwikkelaar interessante mogelijkheden op vlak van complexe montages van verschillende printen. Vele applicaties zijn gebaat bij een buigbare print die slecht een enkele keer dient te buigen alvorens in gebogen vorm definitief in zijn behuizing te worden gemonteerd. Lees meer in onze BLOG.

Bezoek ons gratis in Utrecht dmv een ticket via deze link en verzeker u van uw eerste SEMI-FLEX print, de e-brace.

Wij hopen velen onder jullie te mogen verwelkomen.

Tegoedbon van 40€ als u ons bezoekt met een Eurocircuits toegangsbewijs.

Wij bieden wij elke docent het volgende aan: registreer uzelf en uw klas via deze link en meldt u aan voor het gadget (of stuur ons een lijst met de bezoekers en dan doen wij dit voor u). Bezoek de beurs met uw studenten en verschaf u de toegang door het via onze link bekomen gratis toegangsbewijs.

Na de beurs stuurt u ons een mail met de lijst van studenten die via deze weg de beurs hebben bezocht. Wij verifiëren dit en geven u per student en voor uzelf een tegoedbon, voor de productie van PCBs bij Eurocircuits, ter waarde van 40 Euro (excl BTW). Dit kan u gebruiken als ondersteuning voor uw volgende elektronicaproject dat u met uw studenten zal ondernemen.

Wij hopen velen onder jullie te mogen verwelkomen.

Met vriendelijke groeten,

Matthieu Samain

matthieu.samain@eurocircuits.com

Gratis toegang en een leuk beursgadget – registreer en reserveer nu !

Inhoud

  • Gratis beurstoegang
  • Gratis beursgadget – beperkt aantal

Gratis naar de E&A beurs

Als Eurocircuits relatie kan u nu al registreren via deze link en verzekert u zich van uw gratis toegangsbewijs.

Gratis beursgadget – wees er als de kippen bij!

Het aantal beursgadgets, e-brace, is beperkt.

Samen met een ganse groep FHI-leden van de branche Industriële Elektronica, heeft Eurocircuits een leuk beursgadget bedacht: “e-brace”. Het is een elektronische armband met plezante functies waarover we later nog uitvoerig zullen berichten.

Reserveer nu via deze link want vanaf begin maart zal iedereen kunnen registreren en is het aantal gadgets mogelijk snel uitgeput.

Wij hopen velen onder jullie te mogen verwelkomen.

Gratis toegang en een leuk beursgadget speciaal aanbod voor studenten en docenten

Inhoud

  • Gratis – beurstoegang en beursgadget
  • Tegoedbon van 40€ voor bezoek

Gratis naar de E&A beurs – toegangsbewijs en beursgadget

De E&A beurstoegang is gratis maar het aantal beursgadgets, e-brace, is beperkt. Als Eurocircuits relatie kan u nu al registreren via deze link en verzekert u zich van uw gadget en een gratis toegangsbewijs.

Samen met een ganse groep FHI-leden van de branche Industriële Elektronica, heeft Eurocircuits een leuk beursgadget bedacht: “e-brace”. Het is een elektronische armband met plezante functies waarover we later nog uitvoerig zullen berichten.

Reserveer nu via deze link want vanaf begin maart zal iedereen kunnen registreren en is het aantal gadgets mogelijk snel uitgeput.

Tegoedbon van 40€ als u ons bezoekt met een Eurocircuits toegangsbewijs.

Eurocircuits produceert PCB prototypes en kleine series en is traditioneel sterk geinteresseerd in de onderwijswereld. Getuige hiervan is onder meer onze educatieve websectie “Making a PCB“.

De studenten van vandaag, zijn onze klanten van morgen. Hen enthousiast maken voor elektronicaontwikkeling waarborgt dus onze toekomst. Daarom bieden wij elke docent het volgende aan: registreer uzelf en uw klas via deze link en meldt u aan voor het gadget (of stuur ons een lijst met de bezoekers en dan doen wij dit voor u). Bezoek de beurs met uw studenten en verschaf u de toegang door het via onze link bekomen gratis toegangsbewijs. Na de beurs stuurt u ons een mail met de lijst van studenten die via deze weg de beurs hebben bezocht. Wij verifiëren dit en geven u per student en voor uzelf een tegoedbon, voor de productie van PCBs bij Eurocircuits, ter waarde van 40 Euro (excl BTW). Dit kan u gebruiken als ondersteuning voor uw volgende elektronicaproject dat u met uw studenten zal ondernemen.

Wij hopen velen onder jullie te mogen verwelkomen.

New prototype PCB services launched at Electronica 2014

Our last Technical update covered the Eurocircuits hardware stars at Electronica 2014. There was also an enthusiastic response to our PCB services, especially

  • data validation (DRC) and Design for Manufacturability (DFM) tools
  • tools to tailor design data for specific orders
  • PCB PIXture
  • new options in PCB pooling

For more information on the hardware “stars” and our special Electronica offer on all Eurocircuits hardware, see our newsletter of last week here .

  • eC-test-mate – award-winning fixtureless test equipment for assembled PCBs
  • eC-pre-heater for smoother and more reliable hand-soldering and de-soldering

Data validation and Design for Manufacturability tools

Visitors responded very positively to demonstrations of the data validation and DFM tools built into the Cost calculator menus. They can be used at any stage of the design process to optimise the design flow and avoid expensive and time-consuming re-spins.

See our blog for a typical case-study.

Positive reception too for built-in guidance on cost-effectivemultilayer builds and blind/buried vias.

Another eye-opener: on-screen pre-order DRC validation to catch potential manufacturing issues in your data-set which might otherwise delay delivery.

Tailoring tools

Sometimes you need to modify your fabrication data to fit a particular order. We showed the tools to do this, especially

  • Marking Editor. Place order numbers, logos, QR codes and other batch information exactly where you want it on your PCB.
  • Panel Editor. Create special delivery panels on screen to suit your PCB assemblers, without the need to make detailed drawings.

PCB PIXture

Electronica 2014 highlighted a trend in the market to make the electronics in a product more visible. PCB PIXture prints a graphic image on a PCB as a black/white or gold image defined by the soldermask. Use it to make your designs stand out from the competition and to generate powerful sales messages to potential customers. More

New options in PCB pooling

Responding to the requests of our customers we have added new options to our pooling services. These include:

  • 4-layer FR4 multilayers 1mm thick are now a standard option in STANDARD pool
  • Blue and White solder mask are standard pooling options in STANDARD and BINDI pool
  • eC-stencils are now available in 2 thicknesses: 130 µm and NEW 100µm
  • BINDI pool: maximum order size now increased to 50 m2 for 2L boards.
  • Mask PIXture is now available in BINDI pool

Technical blogs

Some recent highlights:

Plus:

We have an on-going program of technical papers, but if there are particular topics on which you would like us to produce a blog or white paper, please email your usual sales contact or euro@eurocircuits.com.

Meet us

The best way to share ideas and knowledge is face to face. Come and meet us at:

New Eurocircuits products and services presented at this year’s Electronica 2014

Electronica 2014 (11 – 14 November in Munich) was for Eurocircuits the busiest ever. Our booth team was kept busy from beginning to end presenting our newest products and services to existing customers and more than 700 new prospects.

eC-equipment

Interest was high in two new products launched at the show, and we received our first orders on the booth:

  • eC-pre-heater for faster and more reliable hand-soldering and de-soldering.
  • eC-test-mate – our award-winning fixtureless test system for populated PCBs.

Both have been developed in response to our prototype PCB customers looking for high reliability test and assembly solutions at prices suitable for small batch operation.

eC-pre-heater

The eC-pre-heater has been developed to make manual soldering and de-soldering faster and more reliable by reducing heating times and the risk of thermal stress. This makes it particularly effective when soldering critical components or PCB layouts with a high heat-absorbency.

The eC-pre-heater gives you complete control over the pre-heating process.

  • Load the PCB onto the machine and set your preferred height above the heaters or work on the glass
  • Attach the external sensors to measure the actual temperature on the board, top and bottom, for maximum control of the process.
  • Choose which sensor shall drive the controller
  • Decide whether you want to use the front or both heaters
  • Set the temperature that best suits this board or these components using the simple key-pad.
  • When the display shows that the board has reached your chosen temperature, start soldering or de-soldering.

The low profile, ergonomic design and insulated casing make the eC-pre-heater comfortable, convenient and safe to use.

The eC-pre-heater is developed and produced by Eurocircuits and is now available for ordering.

See our eC-pre-heater in action here.

eC-test-mate

The eC-test-mate provides a cost-effective test solution for prototype and small-batch populated PCBs without losing the time and money needed to prepare test-fixtures. For many projects the cost/time needed for test-fixtures is prohibitive, making full programmed functional testing impossible. With eC-test-mate test or no test is no longer a question.

eC-test-mate comprises a docking station and 3 ergonomic test-heads. Each test-head has 21 test-pins and integrated hardware for a specific range of tests: test-head T1 for general applications; T2 to test communication interfaces and T3 to provide additional measurement functions as needed. Combined they offer comprehensive functional testing for small-batch assembled PCBs.

eC-test-mate is straightforward to use.

  1. Incorporate the test-head footprints into your design. If space is tight, the test-head-footprints can be placed on a snap-off coupon.
  2. Write your test program using eC-my-test software. Clear commands and structured menus make programming and debugging simple.
  3. Plug the test head into your PCB and run the test.

To help you to start testing even faster, we also offer an optional Starter Kit which consists of a populated demo PCB and the corresponding test-scripts.

For full information, manuals and footprint data for EAGLE and Altium CAD systems, click here.

Watch the eC-test-mate movie here.

PCB services

We marked Electronica 2014 with extensions to our PCB pooling services. Many visitors new to our services also responded enthusiastically to the range of tools available on the website to validate their data-set and tailor it for their current order.

The extended services and new tools are all part of our ongoing strategy to offer electronics designers a single convenient location for all tools and services they need to bring their products to market on time and on budget.

Tools:

  • Smart menus – PCB Configurator. Visitors appreciated the data validation (Design for Manufacturability) tools build into our Cost Calculator menus, and the ability to run Design Rule Checks on the Gerber data and to view any potential manufacturing issues on screen thus avoiding any delays to delivery. A typical data validation scenario which rang bells with several of the designers was designing a board with 0.150 mm technology and then calling for 70 micron copper to handle heavy current. To ensure good etching and a reliable end-product 70 micron foil requires a minimum track/gap of 0.200/0.250 mm. Using the data validation in the Cost Calculator the designer can check this out early in the design cycle, minimizing the risk of a design re-spin. See our blog Optimum PCB Design Flow.

  • Marking Editor. Designers welcomed the opportunity to place order numbers, logos, QR codes and other batch information exactly where they wanted them on their PCB.
  • PCB PIXture. This new software package allows the designer to print a graphic image on his PCB as a black/white or gold image defined by the soldermask. There was considerable interest in this product at the show as designers felt that there is a strong trend to make visible more of the electronics in new products. PCB PIXture gives them the opportunity to make their designs stand out from the competition and to generate powerful messages to their customers.
  • Panel Editor. In other cases designers needed to create special delivery panels to suit their PCB assemblers, whether in-house or sub-contractors. The Panel Editor allows them to do this online without the losing the time needed to make drawings.

Services:

Responding to the requests of our customers we have added new options to our pooling services. These include:

  • 4-layer FR4 with 1mm thickness a standard option in STANDARD pool
  • Blue and White solder mask are standard pooling options in STANDARD and BINDI pool
  • eC-stencil now also in 100µm thickness
  • BINDI pool: maximum order size now increased to 50 m2 for 2L boards and 25 sq. m2 for 4L.
  • Mask PIXture available in BINDI pool

7 colleagues strong, the Eurocircuits team presented its new services and products to the large numbers of high class visitors who crowded onto the booth.

MOVIE: Electronica 2014 – an impression

This film gives a 1″30″ impression of the buzz at Electronica this year. We hope to see you there again in 2016, from 8 to 11 November.

You can always view this video in full screen mode by clicking the right symbol  on the navigation bar and upgrade the resolution by clicking the setting symbol .

If you have any questions, click the Chat box on the right of the screen and chat with one of our experts.

Fixtureless tester and soldering pre-heater star at Electronica 2014

The Eurocircuits booth at Electronica in Munich last week was crowded from start to finish with PCB designers and engineers checking out the latest Eurocircuits prototype PCB services and hardware.Hardware “stars” were

  • eC-test-mate – award-winning fixtureless test equipment for assembled PCBs
  • eC-pre-heater for easier hand-soldering and de-soldering

– details below. We have a special Electronica offer on all Eurocircuits hardware below.

Service and software “stars” were

  • new options in PCB pooling
  • PCB PIXture

– more information in next week’s Eurocircuits Technical Update.

eC-test-mate – “NO TEST” is no longer an option for populated prototype PCBs

eC-test-mate provides a cost-effective solution for testing prototype and small-batch populated PCBs without losing the time and money needed to prepare test-fixtures.

It comprises a docking station and 3 ergonomic test-heads. Each test-head has 21 test-pins and integrated hardware for a specific range of tests. Combined they offer comprehensive functional testing for small-batch assembled PCBs.

eC-test-mate is straightforward to use.

1. Incorporate the test-head footprints into your design (or on a snap-off coupon if space is tight)

2. Write your test program using eC-my-test software. Clear commands and structured menus make programming and debugging simple.

3. Plug the test head into your PCB and run the test.

4. Add the optional Starter Kit to start you testing even faster.

“Untested” is not an option

Visit our website for full information or watch our movie here.

eC-test-mate is available to order now.

eC-pre-heater

Use the eC-pre-heater to make hand-soldering and de-soldering of critical components smoother and more reliable.

eC-pre-heater gives you complete control over the pre-heating process:

  • Load the PCB onto the eC-pre-heater.
  • Connect the external sensors to the board for optimum precision.
  • Various temperature profiles best suited for this PCB or these components, possible using the simple key-pad.
  • When the display shows that the board has reached your chosen temperature, start soldering or de-soldering.

eC-pre-heater’s slim-line profile, ergonomic design and insulated casing make it comfortable and convenient to use.

Visit our website for more information or watch our movie here.

eC-pre-heater is available to order now.

Electronica 2014 year end equipment special offer

Every customer placing an order for any of our machines: eC-stencil-mate, eC-reflow-mate, eC-pre-heater or eC-test-mate, between the 10th of November 2014 and the 1st of January 2015, will receive a 50€ (excl taxes) discount key valid for any of our PCB services. On top of that anyone ordering both eC-stencil-mate and eC-reflow-mate during the same period will receive a free eC-equipment-starter-kit.

eC-consumables

We have changed the presentation of our eC-consumables to put the most frequently ordered items at the front. Check them out under the Off the Shelf tab, and save money by buying PCB consumables in small batches suited to prototype assembly.

Technical blogs

Some recent highlights:

Plus:

We have an on-going program of technical papers, but if there are particular topics on which you would like us to produce a blog or white paper, please email your usual sales contact or euro@eurocircuits.com.

Meet us

The best way to share ideas and knowledge is face to face. We will be at:

All our events and holidays are listed in the eC-Calendar

Electronica 2014 – Eurocircuits PCB products and services scored high interest with the visitors

This year”s Electronica was the 50th anniversary of one of the world”s largest electronics exhibitions. Over 73.000 visitors from over 80 countries were welcomed by 2.737 exhibitors from 50 countries. In the midst of all this, Hall A5 – booth 502, was Eurocircuits. See our video below.

7 colleagues strong, the Eurocircuits team presented its new services and products to the large numbers of high class visitors who crowded onto the booth.

Demonstrating the new eC-test-mate.

During the 4 days of the exhibition, our team welcomed over 700 new contacts and plenty of existing customers. Our products and services were well received by all our visitors.  Our users told us how highly they value the service and support we offer them.  The response at the show gives us confidence that our ongoing strategy is right: to provide electronics designers in a single convenient location the tools and services they need to bring their design and products to the market in time and on budget.

One of the highlights of the live demos of our PCB services was the appreciation of the way our smart menus can help designer achieve their optimum PCB design flow.

See more of what we showed and explained at the show in our special BLOG.

Furthermore we would like to share some moments of the exhibition with you in the following short film.

MOVIE: Electronica 2014 – an impression

This film gives a 1″30″ impression of the buzz at Electronica this year. We hope to see you there again in 2016, from 8 to 11 November.

You can always view this video in full screen mode by clicking the right symbol  on the navigation bar and upgrade the resolution by clicking the setting symbol .

If you have any questions, click the Chat box on the right of the screen and chat with one of our experts.

D&E event 2012 – 24th of May – Evoluon – NL

Eurocircuits has been an active participant and supporter of the D&E event organized by the FHI since 2003.

D&E Event

2012 will be no exception; we will be there. We will give a presentation “Visual feedback on your PCB design from data entry to finished PCB”. The presentation will take place at 11H15 on Thursday 24 May.  You can find an overview of the complete presentation program here.

Registering for the event is free and can be done here.

Following the D&E event, Eurocircuits will give a webinar on PCB data preparation, what happens to your data when it arrives at Eurocircuits. We will take you step by step through our internal data preparation flow.  The webinar will focus on the influence of design on the quality and manufacturability of the PCB.  It will include tips on how you can design for a more robust and lower cost finished PCB.

This webinar will take place on 20 June at 11H00. Subscribe through this link.

We would like to welcome you on 24 May in the Evoluon and on 20 June from behind your PC.

See you there.

The Eurocircuits team