• Overhanging components.
    • Add extra clearance between PCB”s when constructing panels if you design has components that overlap the PCB edge.
    • This will enable you to mount such components on the PCB while still in panel format, reducing the overall assembly cost.
  • Use of heavy components.
    • If you have heavy components on your boards, consider adding extra material between break-routed PCB”s to prevent the panel from sagging during assembly.
    • When choosing the clearance to use between the PCB”s take into consideration the 2.00 mm cutter width which will be extracted twice from the clearance material between the PCBs.
    • In general V-cut is the better option when working with heavy components.

Return to panel guidelines overview