The only event exclusively designed for electronics design engineers

“Share our knowledge”

The Electronics Design Show in Coventry 2 – 3 October has established itself as one of the leading shows in the UK catering for the professional needs of electronics designers. This year it includes more than 80 exhibitors plus a Conference program and Workshop sessions. Eurocircuits will be there on stand K70 to demonstrate our new knowledge-based user interface and to answer your questions on all aspects of PCB fabrication. We will also be showing our bench-top SMD reflow equipment.


Show opening hours:

Wednesday 2 October: 10.00 – 17.00

Thursday 3 October: 10.00 – 15.00.

Show location:

Jaguar Exhibition Hall 2

Ricoh Arena

Phoenix Way

Foleshill

Coventry CV6 6GE

This is just off Junction 3 of the M6. There is plenty of free parking at the venue. Directions.

Register.

To register for a free VIP pass including free access to the Conference program email vip@electronicsdesignshow.co.uk quoting EUROCI2013.

For free registration go to: http://livebuzzreg.co.uk/2013/eds13/reg/?link=e68b5987fa797529c931

What will we show?

Our new user-interface has been specifically developed so that PCB designers can share our PCB fabrication knowledge and use it to bring their products to market quicker and at lower cost.

Smart menus

Busy designers may not have time to consider all the cost and manufacturability drivers in PCB fabrication technology, or to check that their Gerber output files are complete and correct to their CAD design. So we have developed easy-access smart menus that provide real-time guidance on the features that drive up costs or reduce manufacturability. The menus automatically flag more expensive technologies and incompatible process parameters, in each case with a clear explanation of the issues. You can immediately pick the combination of price and technology which best suits your requirements.

PCB Configurator

Our PCB Visualizer and PCB Checker visual analysis functions are now well-established among designers as the tools of choice to verify data-sets before placing an order and so avoiding delays to delivery caused by incomplete or incorrect data.

The new PCB Configurator tool takes the analysis one step further. You can now run your data through PCB Visualizer, confirm that it is correct, and then let PCB Configurator enter the process parameters into the pricing menu. That way you can be confident that the parameters are correct – and you don’t have to spend time digging them out of the CAD data.

See more information on PCB Configurator and smart menus; on the new material-based services and pricing/ordering menus; and on the new price structure.

Existing users can quickly see what has changed in the new interface and new users can see a full user guide.