Eurocircuits Tips & Tricks – Problem identification and Auto-Repair

PCB Services | eC Solutions
Eurocircuits Tips & Tricks – Problem identification and Auto-Repair
Eurocircuits Tips & Tricks – Problem identification and Auto-Repair

We at Eurocircuits want to make your life as designers easier in any small way we can. You already have the stress and pressure of creating a practical and functional electronic design without the added pressure of knowing all the production restrictions and overcoming them before being able to have the peace of mind that you design can be made.

With our PCB Checker you can see not only the exact location of problem but also the measured values to allow you to either correct the technology specification or your design.

But did you know, we have continued to evolve our unique PCB Visualizer tool to automatically fix these problems for you too, saving you precious hours development time and stress.

Watch the 2 minute video below or read our short BLOG to see how you can save time on money getting your design produced.

If you have any questions about this or any other service please feel free to get in touch and we will be more than happy to help. Try out our online chat!

Blogs

Company news

Production

eC-tools

eC-equipment

  • eC-placer: fast, accurate PCB prototype assembly solution./li>

If you would like us to produce a blog or white paper on a particular aspect of PCB manufacturing technology or PCB soldering, e-mail us at euro@eurocircuits.com

Interact with us

The best way to share ideas and knowledge is face to face.

Come and meet us at

Eurocircuits meets students

Eurocircuits Tips & Tricks – Marking Editor

PCB Services | eC Solutions
Eurocircuits Tips & Tricks – Marking Editor

Eurocircuits tips & tricks – Marking Editor

Did you know that you could add your company logo to your PCB design, add text, Date code, UL marking or even determine where to locate your order number? Not only this but place them either in the copper layer or the silk legend layer?

But why would you do this? The answer is simple and opens a new world of possibilities and tools for design engineers. You can make your design more personalised by adding your company logo, what about adding your name to the board or easily marking it to identify a prototype and not production board? Add a QR code to the board to make it universally identifiable, Or how about simply specifying where your order number should be placed to ensure it is where you want and need it?

All of this has been made possible and easy to do through your PCB Visualizer, in just 3 minutes we can show you in the video below how to open a new world of PCB identification.

We have also create a short blog with more details to help you make the most of your Marking editor

If you have any questions about this or any other service please feel free to get in touch and we will be more than happy to help. Try out our online chat!

Blogs

Company news

Production

eC-tools

eC-equipment

  • eC-placer: fast, accurate PCB prototype assembly solution./li>

If you would like us to produce a blog or white paper on a particular aspect of PCB manufacturing technology or PCB soldering, e-mail us at euro@eurocircuits.com

Interact with us

The best way to share ideas and knowledge is face to face.

Come and meet us at

Eurocircuits meets students

Eurocircuits Tips & Tricks – Pre-Production Approval

PCB Services | eC Solutions
Eurocircuits Tips & Tricks – Pre-production approval


Eurocircuits product news – Pre-Production Approval

Sometimes your data files may contain features that our automated PCB Visualizer process cannot recognize. Or you may be worried that your first layout is not quite right. Whatever your concern, we can give you the reassurance you need. You can do this by Setting up an approval step for the production-ready data for your board just before it goes into physical manufacture. As soon as our engineers have completed their checks, we will send you an email to advise you that the production files are ready and waiting for your approval. Check them using our PCB Visualizer tools, and continue the order, confident that you will get the boards you intended

This is our Pre-production approval process.

But did you know, during the front end data processing stage, our highly skilled engineers verify all your data against your order details and where there is a conflict will, if possible, make a correction and send you a Pre-production approval to ensure that what they propose is correct to your needs. You can see how this is done in our short 2 minute video below.

If you have any questions about this or any other service please feel free to get in touch and we will be more than happy to help. Try out our online chat!

Blogs

Company news

Production

eC-tools

eC-equipment

  • eC-placer: fast, accurate PCB prototype assembly solution./li>

If you would like us to produce a blog or white paper on a particular aspect of PCB manufacturing technology or PCB soldering, e-mail us at euro@eurocircuits.com

Interact with us

The best way to share ideas and knowledge is face to face.

Come and meet us at

Eurocircuits meets students

Electronics & Applications 2017 – Goede beurs, we zien u graag terug in 2019!

PCB Services | eC Solutions
Eurocircuits Tips & Tricks – PCBA Visualizer
Inhoud

  • Overzicht van de beurs
  • Het beursgadget
  • Interessante seminaries
E&A beurs – overzicht van editie 2017

Bedankt Eurocircuits klanten. Jullie waren de grootste groep bezoekers van de beurs. 582 onder jullie kwamen naar de beurs met een gratis ticket verkregen via de Eurocircuits registratielink. Op een totaal aantal bezoekers van iets meer dan 4300, was dit weer voldoende voor het winnen van de marketing cup.

4300 bezoekers is een zeer respectabel aantal voor een locale elektronicabeurs. Het aantal bezoekers aan E&A blijft ook zeer constant over de jaren wat duidt op het belang van E&A in onze BENELUX markt.

Dit jaar vond de beurs plaats in hal 7 van de Jaarbeurs in Utrecht. Deze grotere hal gaf meteen een meer comfortabel gevoel en bood plaats aan een dertigtal extra exposanten tov 2015. De 170 exposanten dit jaar vertegenwoordigden het ganse spectrum van aanbod in de industriële elektronicamarkt wat een interessant informatie- en netwerkplatform bood voor de bezoeker.

De FHI branche Industriële Elektronica, de organisator van E&A, maakte gebruik van de grotere hal om een aantal start-up bedrijven de mogelijkheid te geven zich te tonen aan de markt. Meer hier.

Eurocircuits had dit jaar als focus de nieuwe PCB Assembly Visualizer en de vernieuwde eC-reflow-mate-V4.

KISS LoRa gadget – hot IoT item

Keep It Simple Stupid, Long Range Low Power cloud communicatie-applicatie, of kort, “KISS LoRa“, was een hit

KISS LoRa is een draadloos sensor/actuator platform met IoT-functionaliteit. Tijdens E&A2017, is het gadget ter plaatse geproduceerd op de Live Production Line en werd besproken tijdens een hackathon seminarie dinsdagnamiddag.

Eurocircuits heeft de print geproduceerd met inzet van de PCB PIXture soldereermaskertechniek.

Seminaries tijdens de beurs!

Vele bezoekers hebben elke dag een van de drie seminaries bezocht. U vindt alle presentaies van de 9 verschillende seminaries online. Klik hier! Onze presentative vindt u hier.

We hopen u weer te onmoeten tijdens Electronics & Applications in 2019.

Met vriendelijke groeten,

Matthieu Samain
matthieu.samain@eurocircuits.com