IMS pool now with enhanced base material

/in /by
PCB Services | eC Solutions

We have upgraded the Insulated Metal Substrate type we use in our IMS pool service

More powerful LED applications demand an increased focus on thermal management. More powerful LEDs produce more heat and temperature rise has an impact on the short-term function of a LED part such as colour shift and reduced light output.

The long-term effects shouldn’t be neglected either. Higher operating temperatures result in a reduced life time.

To reduce the operating temperature and thus the impact of the temperature on LED applications or power converters, we decided to make an upgrade on the IMS material. The former used Polytherm TC-Lam 1.3 is now succeeded by Polytherm TC-Lam 2.0 of which you can find the spec sheet on our Download page.

The main difference is the dielectric. This thermally conductive layer has better properties:

  • Thermal conductivity: 2.0 W/mK (upgrade from 1.3 to 2.0)
  • Thermal resistance: 0.50 K/W (lowering from 0.77 to 0.5)

The thick Aluminium (alloy 5052) layer remains unchanged and is responsible for the heat dissipation.

The Cu foil, on the opposite side, is still 35 microns thick. This Cu layer forms the base Cu for the circuit. Other service parameters remain unchanged and can be found here.

“How do we make IMS boards?”, explained on Eurocircuits TV.

Should you have any questions about any of our services, please feel free to get in touch via email, telephone or instantly with our online chat during office hours. We will be more than happy to help.

Why not follow us on our social media, keeping up to date with all of our latest news?

           

Blogs

Customer papers

If you are an active Eurocircuits’ customer and you feel like you have some interesting story to share with our Eurocircuits community, then please send it to us by e-mail. We will evaluate the content and if it fits the scope of what we publish then we will take it on board and inform you of it.

Production

Eurocircuits TV has made an informative piece on how copper is deposited on the PCB in the galvanic process.

All the details about our movie can be read in text form in our BLOG.

eC-tools

We publish articles as tip & tricks or videos on Eurocircuits TV to help our designer customers to maximise their efficiency by using our tools. We also publish seminars on how to use our smart tools. Here is one: “Introduction to Eurocircuits’ smart tools: PCB Configurator, PCB Visualizer”

eC-equipment

Here we release articles about our eC-equipment and their use.

If you would like us to produce a blog or white paper on a particular aspect of PCB manufacturing technology or PCB soldering, e-mail us at euro@eurocircuits.com
Interact with us

Come and meet us at

The best way to share ideas and knowledge is face to face. Check out our eC-calendar

Eurocircuits meets students

Supporting student projects is a top priority for Eurocircuits as students are our tomorrows customers. Learn how creative these students are and what they have accomplished.

 

Eurocircuits offers a solution to Via’s in Pads

/in /by
PCB Services | eC Solutions
Eurocircuits offers a solution to Via’s in Pads

Since the beginning electronic designers and production have always locked heads, designers wanting to making everything smaller and smaller and more and more cost effective, unfortunately this is sometimes counterproductive to both the PCB manufacturer and assembler, resulting in a comprise on both sides and often affecting the quality and electrical stability.

One such issue which often arises is finding a suitable solution to utilising the pad as a through hole connector without causing production and quality issues with solder wicking away through the via and causing insufficient, unstable or even unsoldered joints.

Eurocircuits have the solution, we now offer a Via filling and conductive capping service to enable designers to increase board density without reducing reliability.

We have create a small blog here about the service and how it can benefit you.

As always we have listened to our customers’ needs and invested in a solution that can meet both their demands and budget.

Should you have any questions about any of our services, please feel free to get in touch via email, telephone or instantly with our online chat during office hours. We will be more than happy to help.

Why not follow us on our social media, keeping up to date with all of our latest news?

           

Blogs

Customer papers

If you are an active Eurocircuits’ customer and you feel like you have some interesting story to share with our Eurocircuits community, then please send it to us by e-mail. We will evaluate the content and if it fits the scope of what we publish then we will take it on board and inform you of it.

Production

Eurocircuits TV has started to capture the production steps one by one. How do we register multilayers?

eC-tools

We publish articles as tip & tricks or videos on Eurocircuits TV to help our designer customers to maximise their efficiency by using our tools. We also publish seminars on how to use our smart tools. Here is one: “Introduction to Eurocircuits’ smart tools: PCB Configurator, PCB Visualizer”

eC-equipment

Here we release articles about our eC-equipment and their use.

If you would like us to produce a blog or white paper on a particular aspect of PCB manufacturing technology or PCB soldering, e-mail us at euro@eurocircuits.com
Interact with us

Come and meet us at

The best way to share ideas and knowledge is face to face. Check out our eC-calendar

Eurocircuits meets students

Supporting student projects is a top priority for Eurocircuits as students are our tomorrows customers. Learn how creative these students are and what they have accomplished.