Insight Technology – The Double-Sided Production Flow

Insight Technology – The Double-Sided Production Flow Double Sided PCB production sounds simple enough, but have you ever wondered what the actual production flow involves. Using our Eurocircuits Insight Technology platform we have made a short informative video that explains the process flow. There are more than 20 process steps required to make a Double-Sided […]

0 comments

Soldermask for Via Holes and Pads

Recently, Eurocircuits introduced a spray coating process for Soldermask, this brings many advantages including a thinner and more unified coating which helps us to meet today’s technology challenges. The Soldermask is imaged using a Dai Nippon Ledia Direct Imaging system; this improves registration accuracy and eliminates the need for Photo-tools. The spray coating of Soldermask is only […]

0 comments

Cross Sections – What is their Purpose ?

Eurocircuits uses cross sections as part of its quality control Cross sections are a power tool that ensures high quality production and products. Preparation of a cross section is a destructive process, a section of the production panel is cut out, in most cases a specially designed Test coupon is used (these are placed on […]

0 comments

Via Filling – Eurocircuits have invested in the ITC THP 30 machine

0 comments

Eurocircuits – Tips & Tricks – How do we use our galvanic line to dispose copper?

Eurocircuits – Tips & Tricks – How do we use our galvanic line to dispose copper? At Eurocircuits we solidly believe that it is important to inform our design engineers about the technology we use to produce their Printed Circuit Boards. Engineers constantly strive to upgrade their knowledge to become better engineers. Design for Manufacturing […]

0 comments

Eurocircuits – Tips & Tricks – How do we Expose the Soldermask during Production?

Eurocircuits – Tips & Tricks – How do we Expose the Soldermask during Production? Every year Eurocircuits makes significant investments in its production plants to upgrade efficiency but also and even more important to upgrade the quality and reliability of the final product we deliver. One of these fields of investment is the Soldermask department. […]

0 comments

eC-TV – how do we galvanise PCBs

0 comments

eC-TV – How do we Expose the Soldermask during Production?

0 comments

Review – standard- and predefined build-ups

0 comments

A New Soldermask for Eurocircuits’ PCBs.

0 comments

Eurocircuits Technical Update – direct imaging technology

In this update New direct imaging technology – more capacity, more design options 2015 – a record start to the year Medium-volume BINDI pool now UL approved – and 4 layers soon Eurocircuits sponsor student projects Direct-imaging technology MORE CAPACITY The Ledia V5 direct-imaging system, installed in January, is our largest single investment in a […]

0 comments

How do we assure the quality of your PCB – part 3

0 comments

What about UL ?

0 comments

How do we assure the quality of your PCB. – part 2

0 comments

Tolerances on PCB

0 comments

How do we assure the quality of your PCB. – part 1

0 comments

RoHS and lead-free compliance

0 comments

How often can you raise a Eurocircuits PCB to lead-free soldering temperatures?

0 comments

Gold plating for edge connectors

0 comments

Soldermask on via-holes in case of chemical Nickel-Gold surface finish

Soldermask on via holes There are 3 ways our customers prepare their layouts with respect to covering via-holes with soldermask: As necessary background information we need to briefly introduce you into the technology of applying soldermask to the boards. The easiest production method is to have all vias open from both sides. The vias will […]

0 comments

Hand-soldering – point by point or mini-wave technique

Hand-soldering with the same high quality result as reflow or wave soldering? Are you ready for the challenge ? Let us look at the mini-wave soldering technique. This picture shows that tools and skills are the basics to achieve a good result in hand-soldering. You agree ? Hand-soldering is in most cases the last step […]

0 comments

Through hole component soldering with the eC-reflow mate

PIP (Pin in Paste) technology for soldering trough hole components PIP is a technology for assembling through hole components using a conventional reflow soldering process. The process is also known as THTR (Through Hole Technology Reflow). Most PCB”s that contain SMD components usually also contain some through hole components, such as connectors, switches, capacitors and […]

0 comments